产品中心
PRODUCTS CNTER铰刀修磨使用高精度的测量仪器对铰刀进行精确测量,获取刀具的直径变化、锥度偏差、切削刃粗糙度等关键数据。
相关文章
伊尔耐德(天津)科技的铰刀修磨服务,专注于提升铰刀的切削性能和使用寿命。
铰刀修磨的具体步骤包括:
首先,对铰刀进行仔细检查,包括铰刀的外观、尺寸规格以及切削刃的磨损情况等,对铰刀的初始状态进行全面了解。
然后,使用高精度的测量仪器对铰刀进行精确测量,获取刀具的直径变化、锥度偏差、切削刃粗糙度等关键数据。
接着,根据测量数据进行分析,依据铰刀的材质、型号和加工要求,制定详细的修磨方案,明确修磨的具体步骤和参数。
之后,将铰刀固定在专业的磨床上,运用高精度的磨削工艺和磨削材料,对铰刀的切削刃进行精细磨削,恢复切削刃的锋利度。磨削过程中,要注意控制磨削速度、进给量和磨削深度,避免对铰刀造成损伤。
最后,修磨完成后,对铰刀进行再次检测校验,检查铰刀的各项指标是否达到高质量标准,如孔径加工的精度、表面质量等方面。确保修磨后的铰刀能够在加工过程中展现出优异的切削性能,显著提高加工效率和成品质量,减少孔径的锥度和椭圆度。
Reamer Grinding Product Introduction
lrnide(Tianjin) Technology focuses on improving the cutting performance and service life of the reamer.
The specific steps of reamer grinding include:
First, carefully inspect the reamer, including the appearance, size specifications and wear of the cutting edge, and have a comprehensive understanding of the initial state of the reamer.
Then, use high-precision measuring instruments to accurately measure the reamer to obtain key data such as tool diameter change, taper deviation, and cutting edge roughness.
Then, analyze the measured data, formulate a detailed grinding plan based on the material, model and processing requirements of the reamer, and clarify the specific steps and parameters of grinding.
After that, fix the reamer on a professional grinder, use high-precision grinding technology and grinding materials to finely grind the cutting edge of the reamer to restore the sharpness of the cutting edge. During the grinding process, pay attention to controlling the grinding speed, feed rate and grinding depth to avoid damage to the reamer.
Finally, after grinding, the reamer is inspected and calibrated again to check whether the various indicators of the reamer meet the high quality standards, such as the accuracy of hole processing, surface quality, etc. This ensures that the reamer after grinding can show excellent cutting performance during the processing, significantly improve the processing efficiency and quality of the finished product, and reduce the taper and ovality of the hole.
公司邮箱: lrnide@sina.com
服务热线: 022-82244327
公司地址: 天津市武清区梅厂镇津围公路东侧(伊尔耐德)lrnide数控刀具修磨中心