产品中心

PRODUCTS CNTER

当前位置:首页产品中心金属切削工具复合台阶钻修磨

复合台阶钻修磨

产品简介

复合台阶钻修磨依据检测数据进行深入分析,根据不同台阶的切削要求和材质特性,结合刀具的整体性能要求,制定个性化的修磨方案,确定各台阶的修磨深度、角度以及修磨顺序。

产品型号:
更新时间:2025-02-26
厂商性质:生产厂家
访问量:267
详细介绍在线留言

伊尔耐德(天津)科技公司针对复合台阶钻修磨提供专业的修磨解决方案。

复合台阶钻修磨的具体工作流程如下:

首先,对复合台阶钻进行全面检测,使用各种高精度测量仪器获取刀具的各台阶尺寸、切削刃状况等信息,记录磨损数据。

接着,依据检测数据进行深入分析,根据不同台阶的切削要求和材质特性,结合刀具的整体性能要求,制定个性化的修磨方案,确定各台阶的修磨深度、角度以及修磨顺序。

然后,采用专业的磨削设备,先将复合台阶钻固定在合适的夹具上,然后按照修磨方案依次对各个台阶进行精细磨削,确保每个台阶的切削刃锋利度和尺寸精度都达到要求。在磨削过程中,严格控制磨削速度、进给量等参数,保证磨削质量的一致性。

最后,在修磨完成后,再次对复合台阶钻进行全面检测,确保各台阶之间的尺寸精度和同心度符合要求,同时测量切削刃的粗糙度和锋利度,保证复合台阶钻在钻孔过程中能够继续稳定、高效地进行作业,满足各种复杂的钻孔加工需求。

Composite step drill grinding product introduction

lrnide(Tianjin) Technology Co., Ltd. provides professional grinding solutions for composite step drills.

The specific work flow of composite step drill grinding is as follows:

First, conduct a comprehensive inspection of the composite step drill, use various high-precision measuring instruments to obtain the size of each step of the tool, cutting edge condition and other information, and record wear data.

Then, conduct in-depth analysis based on the inspection data, formulate a personalized grinding plan based on the cutting requirements and material characteristics of different steps, and combine the overall performance requirements of the tool to determine the grinding depth, angle and grinding order of each step.

Then, use professional grinding equipment to first fix the composite step drill on a suitable fixture, and then finely grind each step in turn according to the grinding plan to ensure that the cutting edge sharpness and dimensional accuracy of each step meet the requirements. During the grinding process, strictly control parameters such as grinding speed and feed rate to ensure the consistency of grinding quality.

Finally, after grinding, the composite step drill is fully inspected again to ensure that the dimensional accuracy and concentricity between the steps meet the requirements. At the same time, the roughness and sharpness of the cutting edge are measured to ensure that the composite step drill can continue to operate stably and efficiently during the drilling process to meet various complex drilling processing needs.

 

 

 

上一个:合金铣刀修磨

返回列表

下一个:没有了

在线留言

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

Copyright © 2025 伊尔耐德(天津)科技有限公司 Al Rights Reserved
备案号:津ICP备2024027305号-1

技术支持:化工仪器网   管理登录   sitemap.xml

扫码添加微信
关注

联系

18910271557

联系
顶部